Scottsdale Hardscape · Scottsdale, Arizona
Pavers & Travertine Installation - Scottsdale, AZ
Custom paver and travertine design and installation for DC Ranch, Silverleaf, Troon North & Gainey Ranch
Schedule a Consultation -Scottsdale Standard
Pavers & Travertine in Scottsdale, Arizona
Pavers and travertine are the foundation of outdoor living in North Scottsdale. The material underfoot on a patio, around a pool, or along a driveway defines the tone of everything built above it. In DC Ranch and Silverleaf, that tone is consistently clean, natural, and durable. Travertine in a warm cream or walnut tone, or large-format porcelain in a sand or stone finish, are what hold up visually and physically in this market for decades.
Every paver installation we do is engineered from the base up - properly compacted aggregate base, adequate drainage, and expansion joints where Arizona heat and caliche soil require them. The difference between a paver patio that holds up for 25 years and one that shifts in five is almost always in the base preparation, not the surface.
Materials
Paving Materials We Design With
Scottsdale paver and travertine work has to handle heat, pool water, daily use, vehicle loads, and architectural expectations. We select materials for both appearance and performance.
Natural Travertine
A strong choice for pool decks, patios, courtyards, and entertaining areas where homeowners want a refined surface that stays relatively comfortable underfoot.
Architectural Pavers
Engineered paver systems work well for driveways, motor courts, garden paths, patios, and larger outdoor living areas with repeated foot or vehicle traffic.
Porcelain Pavers
Large-format porcelain creates a clean modern look for contemporary Scottsdale homes, especially around pools and covered patios.
Natural Stone
Flagstone, limestone, and accent stone can soften transitions, connect planting areas, and add texture where the architecture calls for it.
Where We Install
Where Pavers and Travertine Matter Most
The right surface changes how an outdoor space feels and functions. We plan these areas with drainage, furniture layout, shade, circulation, and future maintenance in mind.
Pool Decks and Spas
Slip resistance, heat performance, coping alignment, and drainage all have to be solved before material is installed.
Patios and Outdoor Living Rooms
Dining, lounging, grilling, shade structures, and fire features need clear circulation and enough finished surface to feel intentional.
Driveways and Motor Courts
Vehicle-rated paver systems require proper base preparation, edge restraint, compaction, and drainage planning.
Entries, Walkways and Courtyards
These surfaces set the arrival experience and should relate directly to the home architecture.
Construction
How We Build It
Paver and travertine failures usually start below the surface. We pay close attention to excavation, base material, compaction, elevations, edge restraint, drainage, and the transition to surrounding landscape.
Base Preparation
The base is engineered for the surface and use case, whether it is a foot-traffic patio or a vehicle-rated motor court.
Drainage and Slope
Finished surfaces are set to move water away from the home, pool, outdoor kitchen, and low points on the property.
Pattern and Finish Layout
We plan pattern direction, borders, cuts, step transitions, and material changes so the installation looks deliberate.
Frequently Asked Questions
Common Questions
What paver and travertine materials do you use in Scottsdale?
We work with travertine (tumbled and honed, in cream, walnut, and noce tones), concrete pavers (large format and standard modular), porcelain (large format, outdoor-rated), and natural flagstone. Material selection is driven by design intent, HOA requirements, and site conditions.
Do you handle paver permits in Scottsdale?
Yes. Paver and hardscape projects in the City of Scottsdale typically require a permit for covered structures or significant grading. For HOA communities like DC Ranch and Silverleaf, we format ARC submittal packages as well.
How long does a paver patio installation take in Scottsdale?
A typical patio installation runs 1-2 weeks depending on scope and material lead times. Larger projects involving pool deck, driveway, and patio together run 3-4 weeks. We provide a production schedule before work begins.
Can you replace or repair existing pavers on a Scottsdale property?
Lone Star is a design-build installation firm - we do not offer repair or maintenance on existing paver systems. If you want to remove and replace an existing patio as part of a larger outdoor renovation, that falls within our scope.
Contact Us
Start Your Scottsdale Pavers & Travertine Project
We accept a limited number of new projects each season. If you're planning a pavers & travertine project at your Scottsdale property, we'd welcome the conversation. Call us at 602-992-7827 or use the contact form to schedule a site consultation.
Phone 602-992-7827
Email design@lonestaraz.com